The end results of steel and metal processing are familiar to everyday consumers: Cars, garage doors, refrigerators, sheet metal facades, cell phones, even aluminum foil. The list could go on and on.
This material is used for:
Squeeze and dip rollers
Our squeeze and dip rollers are used in pre- and post-treatment, in etching and rinsing, and have the following properties:
Optimized elasticity for stable squeezing performance
High resistance to abrasion and edge cutting
Excellent resistance to aggressive process media
Uniform pressure profile for consistent results
High thermal stability under continuous operation
Long operational lifetime
Pressure, deflection, transport and idler rollers
Our pressure rollers, deflection rollers, transport rollers and idlers are used throughout the entire system and have the following properties:
High resistance to mechanical wear under load
Excellent dimensional stability in operation
Reliable resistance to oils
Defined friction properties for drive and traction applications
Tension and brake rollers
Our tension and brake rollers are used at the belt infeed and outfeed and have the following properties:
Excellent resistance to oils
High abrasion resistance
High mechanical durability under load
Optimized friction properties for reliable belt grip
S-Rollers
Our S-Rollers are used in the tinning/galvanizing process and have the following properties:
Ultra-homogeneous surface for precision coating of ultra-thin layers
Excellent resistance to demanding process media
High thermal stability under continuous operation
-Hohe mechanische Belastbarkeit
Varnishing rollers
Our varnishing rollers have an organic coating and have the following properties:
Excellent resistance to a wide range of varnish chemistries
Minimal and uniform swelling for stable performance
Engineered surface for consistent varnish transfer
This material is used for:
Varnishing rollers
- sehr hohe Quellbeständigkeit gegen Lacke und Reiniger
- schnelles und gutes Rückstellverhalten
- hohe Abriebfestigkeit
- unempfindlich gegen Einlaufen und Kantenmarkierungen bei Formatwechsel
- niedrige Oberflächenrauheit durch Polieren oder Superfinishen erreichbar
Oil application rollers
- sehr hohe Quellbeständigkeit gegen Lacke und Reiniger
- schnelles und gutes Rückstellverhalten
- hohe Abriebfestigkeit
- unempfindlich gegen Einlaufen und Kantenmarkierungen bei Formatwechsel
Glue application rollers
- schnelles und gutes Rückstellverhalten
- hohe Abriebfestigkeit
- Oberflächenrillierung nach Vorgaben des Kunden
- 2-Schichtaufbau für gute Abriebwerte und verformbarer Unterbau für hohe
Elastizität
Optirollers (special varnish application rollers)
- sehr hohe Quellbeständigkeit gegen Lacke und Reiniger
- schnelles und gutes Rückstellverhalten
- hohe Abriebfestigkeit
- unempfindlich gegen Einlaufen und Kantenmarkierungen bei Formatwechsel
- fein gerillte Oberfläche für dünne, gleichmäßigen Lackauftrag
Contact sanding rollers
- schnelles und gutes Rückstellverhalten
- hohe Abriebfestigkeit
- mehrgängige Spiralrillungen
Feed rollers for sanding machines
- hohe Abriebfestigkeit
- guten „grip“
- radiale Einzelschliffe
Alle Walzen haben eines gemeinsam: Sie weisen sehr lange Standzeiten auf, und seltene
Walzenwechsel ergänzen somit Ihren Prozess und entlasten somit Ihr Budget.
Ihre Vorteile auf einen Blick:
Hohe Dimensionsstabilität der Beschichtungen
Hohe Elastizität, schnelles Rückstellverhalten, gute Abriebfestigkeit
Wenn nötig, gemeinsame Problemlösung – Anwendungstechniker ist vor Ort
Abhol- und Lieferservice
Wirtschaftliche Vorteile durch Walzen-Komplettangebote
Your benefits at a glance
Long operational lifetime
Geringer Verschleiß
Perfektes Abquetschverhalten
Gleichmäßiger und homogener Bandlauf
Hohe Anlagenverfügbarkeit
Geringe Wartungskosten
As a manufacturer, you are aware of the complex interrelationships until a slab leaves the rolling mill after hot and cold rolling, passes through the multiple steps of refinement as a coil and reaches your customer as a finished intermediate product. You are also aware that this manufacturing process depends on the top quality of all components of your equipment. With more than 120 years of experience in the manufacture of technical rollers, we are happy to assist you on your way to optimally equipping your machines.
This material is used for:
Squeeze and dip rollers
Our squeeze and dip rollers are used in pre- and post-treatment, in etching and rinsing, and have the following properties: More
Pressure, deflection, transport and idler rollers
Our pressure rollers, deflection rollers, transport rollers and idlers are used throughout the entire system and have the following properties: More
Tension and brake rollers
Our tension and brake rollers are used at the belt infeed and outfeed and have the following properties: More
S-Rollers
Our S-Rollers are used in the tinning/galvanizing process and have the following properties: More
Varnishing rollers
Our varnishing rollers have an organic coating and have the following properties: More
Next slide
Previous slide
Your benefits at a glance
Wir bieten Ihnen ein Gesamtpaket, das unser Produkt unvergleichlich macht:
German
English